hy electronic (cayman) limited www.hygroup.com.tw ultra low vf=0.28v at if=7.5a 45 30 chipsize 102 i to-220ab ito-220ab features trench schottky technology halogen low power loss, high efficiency free high current capability, low vf high surge capacity rohs compliant HTR30I45CT htrf30i45ct to-263ab to-262aa converter ,and polarity protection applications mechanical data case: to-220ab / ito-220ab / to-262aa / to-263ab polarity: as marked on the body weight: 0.08ounces,2.24 grams mounting position :any htrb3045ct htri30i45ct maximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave ,60hz, resistive or inductive load. for capacitive load, derate current by 20% maximum recurrent peak reverse voltage v rrm v maximum rms voltage v rms v maximum dc blocking voltage v dc v maximum average forward rectified current ( see fig.1) maximum average forward rectified current ( per leg ) peak forward surge current 8.3ms single half sine-wave super imposed on rated load peak repetitive reverse current at tp = 2 s, 1 khz i rrm a operating temperature range t j storage temperature range t stg parameter / conditions symbol unit breakdown voltage per diode v br v forward voltage (note1) if=7.5a @tj=25 if=7.5a @tj=125 if=15a @tj=25 if=15a @tj=125 maximum dc reverse current @t j =25 ua at rated dc bolcking voltage @t j =125 ma typical junction capacitance (note2) c j p f HTR30I45CT htrb3045ct thermal resistance per diode (note3) rjc 3.0 3.5 /w 3.5 a v f v 0.39 0.39 typ 0.28 0.43 0.37 symbol 600 3.thermal resistance junction to case. electrical characteristics (t a = 25 c unless otherwise noted) unit htri30i45ct notes:1.300us pulse width,2% duty cycle. 2.measured at 1.0 mh z and applied reverse voltage of 5.0v dc. 0.30 0.46 parameter 0.37 5.5 130 i fsm rev.1, 1-mar-2017 2017 -55 to +150 -55 to +175 htrf30i45ct i r unit typ thermal characteristics (t a = 25 c unless otherwise noted) 45(minimun) max characteristics symbol 45 - maximum ratings (t a = 25 c unless otherwise noted) i (av) classification 94v-0 HTR30I45CT, htrf30i45ct, htri30i45ct, htrb30i45ct a 210 30 15 31 wheeling, switching power supplies, dc-dc 1 45 schottky barrier rectifiers metal of silicon rectifier , majority carrier conduction plastic package has ul flammability for use in low voltage,high frequency inverters,free HTR30I45CT, htrf30i45ct htri30i45ct, htrb30i45ct pb reverse voltage volts forward current amperes
rating and charactertic curves HTR30I45CT, htrf30i45ct htri30i45ct, htrb30i45ct www.hygroup.com.tw this document is subject to change without notice. rev.1, 1-mar-2017 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 0 25 50 75 100 125 150 average forward current (a) case temperature ( c) figure 1. forward current derating curve HTR30I45CT htrf30i45ct htrb3045ct 0.01 0.1 1 10 100 0 0.2 0.4 0.6 instantaneous forward current (a) instantaneous forward voltage (v) figure 3. typical instantaneous forward characteristics per leg tj=25 c tj=125 c 20 30 40 50 60 70 80 90 100 instantaneous reverse current (ma) percent of rated peak reverse voltage (%) figure 4. typical reverse characteristics tj=25 c tj=125 c 100 1,000 10,000 0.1 1 10 100 junction capacitance (pf) reverse voltage (v) figure 5. typical junction capacitance figure 2. maximum non - repetitive surge 0 50 100 150 200 250 1 10 100 peak forward surge current (a) number of cycles at 60hz pulse width 8.3 ms single half - sine - wave (jedec method) 0 1 2 3 4 5 6 7 8 0 5 10 15 average power loss(w) average forward current(a) figure 6. forward power loss characteristics d=0.1 d=0.2 d=0.3 d=0.5 d=0.8 d=1.0 tj=150 c tj=150 c 10 100 0.001 0.01 0.1 1
package outline dimensions in millimeters HTR30I45CT, htrf30i45ct htri30i45ct, htrb30i45ct to-220ab to-262aa to-263ab ito-220ab www.hygroup.com.tw this document is subject to change without notice. rev.1, 1-mar-2017
legal disclaimer notice www.hygroup.com.tw this document is subject to change without notice. rev.1, 1-mar-2017 no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of hy. product names and markings noted herein may be trademarks of their respective owners. ers, must be validated for each customer application by the customer?s technical experts.product specifications do not expand or otherwise modify hy?s terms and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, hy products are not designed for use in medical, life-saving, or life-sustaining applicati- ons or for any other application in which the failure of the hy product could result in personal injury or death.customers using or selling hy products not expressly indicated for use in such applications do so at their own risk.please contact authorized hy pers- onnel to obtain written terms and conditions regarding products designed for such applications. antability. statements regarding the suitability of products for certain types of applications are based on hy?s knowledge of typical require- ments that are often placed on hy products in generic applications. such statements are not binding statements about the suitabi- lity of products for a particular application. it is the customer?s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application.parameters provided in datasheets and specific- ations may vary in different applications and performance may vary over time. all operating parameters, including typical paramet- disclaimer all specifications and data are subject to bechanged without notice to improve reliability function or design or other reasons. hy makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co- ntinuing production of any product. to the maximum extent permitted by applicable law, hy disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d- amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch-
|
